Can we really take a free-standing mezzanine to a new building?

Yes. It comes apart the same way it went together. You pay for teardown, trucking and reinstalling, but that is far less than buying a new structure.

Do we need our landlord's approval?

Because nothing attaches to the building, approval is usually easier to get. Most leases still require notice for any addition, so read yours before we finalize the layout.

Is free-standing weaker than other mezzanine types?

No. It carries the same deck loads. The difference is only how the load reaches the floor, not how much the deck can hold.

Will it fit a 32 to 40 foot clear building in La Vergne or Smyrna?

Easily. Taller buildings give you room for a full working level with forklift clearance below, and sometimes space for a second deck later.

Can we start small and add on?

Yes. New bays bolt onto the existing frame, so phase one can be sized to today's budget and phase two to next year's volume.

Free-standing steel mezzanine inside a leased Nashville-area warehouse

Free-Standing Mezzanines for Leased Warehouses in Nashville, TN

Name: Nashville Mezzanines
Address: 1639 Medical Center Pkwy, Suite 400, Unit L, Murfreesboro, TN, 37129, US
Telephone: (888) 553-7276
Price range: $$

Most operations we visit around Nashville do not own their building. With industrial vacancy this tight, moving to a bigger one is slow and expensive, so the smarter play is to add a level inside the space you already lease.

A free-standing mezzanine does that without touching the building. It stands on its own steel columns anchored to the floor, and when the lease ends, it can be unbolted and set up again in your next location.

(888) 553-7276

How a Free-Standing Mezzanine Carries the Load

The name says how it works. Every column carries its share of the deck straight down and is anchored to the floor, so the roof framing and exterior walls never see any of the load. Your landlord's building stays exactly as it was.

Underneath, it is the same kit of parts as any steel mezzanine: columns, beams, joists and a deck, plus stairs, handrail, gates and column guards where the layout calls for them. Because every joint is bolted, bays can be added later or the whole level can be taken down and loaded on a truck.

We lay out the column grid so posts land in dead space, not in a pick aisle or a forklift lane. In the newer 32 to 40 foot buildings around Murfreesboro and Lebanon that often means a taller level; in a flex suite in Franklin or Hendersonville it usually means a compact deck over offices or staging.

Not sure free-standing is the right fit? Compare the options on our warehouse mezzanines page, or see how we approach buildings in Murfreesboro, Lebanon and Franklin.

Why Tenants Pick Free-Standing

Leaves the building untouched

Nothing bolts to the roof or walls, so you are not asking the landlord to approve structural changes to their property.

Moves when your lease does

Unbolt it, ship it, and stand it up in the next building. That beats buying a new structure every time you relocate.

Often treated as equipment

Because it is not tied into the building, many companies carry it as equipment rather than a permanent improvement. Ask your accountant how it applies to you.

Grows in phases

Start with the deck you can justify this year and add bays when volume picks up, without tearing anything out.

Free-Standing Mezzanine Specs

Typical bay spans: 8 ft to 30 ft, set by your layout
Live load capacity: 125 psf standard, higher available
Deck options: Unfinished ResinDek, Gray Diamond Seal ResinDek, diamond plate, bar grating
Under-deck clearance: 7 ft to 16 ft typical
Finishes: Primed or powder-coated steel

Where It Makes Sense

3PL and e-commerce tenants in leased buildings
Companies that expect to move within a few years
Flex and light-industrial suites in Franklin and Hendersonville
Storage decks over shipping or staging areas
Offices or break rooms tucked under the deck
Operations that want to add bays in phases

How It's Built

The systems we supply are drawn in 3D before fabrication and designed so the entire frame can be unbolted and erected again. Every column is anchored to the floor and the calculations confirm that no load goes into your building. Nothing is welded on site, so the deck can be extended or rearranged after the fact. Backed by Warehouse Equipment & Supplies Co., in business since 1997.

From First Walk-Through to Finished Deck

Warehouse Consultation

We walk the space and talk through your lease term and the odds of moving.

Layout and quote

You get a scaled drawing with column locations, clearances and an itemized price.

Engineering

Load calculations are completed for your deck.

Fabrication

Steel is cut, numbered and shipped as a bolt-together kit.

Install and handoff

Our vetted installer sets the frame and deck, then walks you through the finished level.

Price a Free-Standing Mezzanine for Your Building

Tell us the building, the lease situation and what goes on the deck. We will reply with a layout and a number, or call (888) 553-7276.

Free-Standing Mezzanine Questions From Nashville Tenants

Free-Standing Mezzanines Across Middle Tennessee

Nashville Antioch La Vergne Smyrna Murfreesboro Lebanon Mt. Juliet Gallatin Hendersonville Goodlettsville Franklin Spring Hill Columbia Clarksville Springfield Donelson Portland

Visit Our Murfreesboro Office

Our Murfreesboro office sits on the I-24 corridor, a short drive from most of Middle Tennessee.

Nashville Mezzanines

Address

1639 Medical Center Pkwy
Suite 400, Unit L
Murfreesboro, TN 37129

Phone

(888) 553-7276

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

More Room Without a New Lease

Call (888) 553-7276 to set up a free Warehouse Consultation in your building.

(888) 553-7276